Recently, we introduced you to the Pro-Ject Audio RPM 5.1 – the turntable that will be driving Murfie’s (currently-in-beta) vinyl service. Today, I’d like to introduce the iFi iPhono Preamplifier. The iPhono is a versatile phono preamp that is helping us accurately reproduce the audio on your LPs as it was originally intended.
For those who don’t know, when vinyl records are pressed, an equalizer is first applied to the audio in order to compensate for some of the physical qualities of vinyl. For example, pressing un-equalized audio into vinyl with no manipulation to the lower range could cause grooves that are too wide for the stylus. To make up for this, different companies have applied different EQ curves before masters have been created. To get accurate audio reproduction, you must then apply a equalization to the raw signal from the record you are playing.
In the process of doing that, you also have to worry about amplifying the signal to line level without adding noise or distortion. There’s also an added complication in that you have to accommodate the myriad EQ curves used over the years.
The iFi iPhono Preamplifier helps us tackle these issues with a simple and robust setup. I sat down for a chat with Thorsten Loesch (Chief Designer at Abbingdon Music Research and iFi) to discuss iFi, the iPhono, music and more.
John: First of all, thanks for taking the time to chat with me today. Tell me a bit about iFi. On your site, I see that iFi is a company striving to be green. Can you tell me what that means to iFi, and what steps you’ve taken to make audio gear green?
Thorsten: Thank you. First and foremost, being majority-owned by Abbingdon Music Research, a maker of ultra-fi audio products, we are upheld to a high, corporate standard. Here in England, as part of the EU, we have to adhere to the EU regulations, and from 1st Jan 2013, the Standby law meant that all electronic products must consume <0.5W when in standby. We went down the other route, which is to not have a Standby option. So the iFi unit is either on or off!
Even when in use, our products only consume 9v. We also use as few plastics as possible – for obvious reasons. We endeavor to make our product range to offer as much long-term enjoyment as possible, so that the user does not have to change any iFi product, or if they do, then they can pass onto friends or family.
Our packaging is 100% cardboard so it can be recycled. These small initiatives give you a snapshot into how we try our best to be environmentally-friendly while still making really, really great sounding products.
John: You guys seem to have been quite busy lately. You were recently at the Guangzhou Show, and you’re headed to CES in January, correct?
The nano iDSD is a ‘Digital-to-Audio Converter’ so with suitable Computer/Smart Device, one can send the highest quality (lossless as opposed to lossy) files and enjoy them direct on in-ear monitors. The nano iCAN is a Headphone Amplifier that has 10x the power of a normal iPhone to ensure aftermarket headphones perform to their full potential.
John: The piece of equipment we’re excited about here at Murfie is the iPhono preamp. Can you talk about about the design of that device?
Continue reading Interview with Thorsten Loesch of iFi (Makers of the iPhono Preamplifier)